Payment & Shipping Terms:
|Car Brand:||HODNA||Car Type:||Honda Accord 1.4'03 CM5|
|OEM:||80100-SDG-W01||Core Size:||PA 694*358*16mm|
|Core Thickness:||16mm||Tank Size:||Dirmeter 20*376mm|
|Carton:||875*105*420mm||Radiator Core Type:||Tube-fin|
|Cold Style:||Water-cooled||Structure:||Open Type|
|Radiator Type:||Direct-flow||Water Temperature Sensor Type:||Switch Type|
AC Universal Condenser Parallel Flow 14.1" x 27.3" OEM80100-SDG-W01
Air Conditioning Condenser
The Air Conditioning Condenser is a heat exchanger.
Located in front of the vehicle, right in front of the radiator, this part receives high-pressure, hot refrigerant from the compressor. Refrigerant flows through the condenser and cools off from either the wind when driving at highway speeds, or air blowing from electric cooling fans or the fan clutch at low speeds and idle.
Older condensers were built using a serpentine design, meaning one long tube was folded back and forth, with just a single path for the refrigerant to flow through. Newer designs are called parallel flow, and have many tubes stacked horizontally, connected to a vertical tube at each end. Refrigerant can travel many different paths through a parallel flow condenser.
|Manufacturer Part Number||KJ - 81019|
|Core Size||PA 694*358*16mm|
|Trade Terms||FOB ShenZhen|
|Payment Terms||L/C T/T, Western Union|
|Payment Condition||30% deposit in advance, 70% balance before delivery|
|Delivery Time||30-40 working days after Money received|
|Fob price||We will quote you the Fob price after you confirm
the Model radiator you want and how many
|Head pipe||Weight Of Core||Baffle Plate|
|Fin||Height Of Core||Side Plate|
|Cooling Tube||Inlet||KINGA Logo|
|Width Of Core||Outlet||Thickness Of Core|
|Nutral Packing||VVO packing|
|Blister Packing||Pakcing depend what you need|
The reasons for choosing us:
1. Quality is guarantee, we own ISO/TS 16949:2009, 6 national patented technology certificates.
2. Delivery Guaranteed: 30-40 working days after Money received
3. We can produce according to your special requirement, sending us drawing or smaple is acceptable.
4. Your brand logo can be marked.
5. Excellent before sale and after sale service.
We have the radiator/condenser/mold/board punching/tank injection workshop
So we can have good control on the cost/quality and delivery date.
We have strict quality control system to keep each radiator/condenser standardized.
Welcome to visit our factory, we do hope to be your stable partner!
|Factory Name||GuangDong Kinga Autoparts Manufature Co.,Ltd|
|Contract Person||Nicole Liu|